Home Solutions Copper Teniente Converter

Copper Teniente Converter

Converter水印

 

The copper teniente converter is a horizontal steel barrel with submerged tuyere. This kind of primary smelting is basically used to produce blister copper or high grade matte in a continuous process combined with optimized energy balance

  1. Tuyere slag line zone: very harsh working conditions, always being eroded by molten blister copper penetration, copper slag (is mainly SiO2-FeO-CaO)chemical reaction damage, matte SO2 gas proliferation erosion and oxygen spray process oxidation-reduction reaction damage, high temperature hydration, refining process overheat reaction damage and spraying process temperature severe change and over heat liquid rigorous erosion, mechanical fatigue due to periodic operations. Only high Chrome Direct-bonded magnesite-chrome bricks (DMK) and Rebounded Fused Magnesite Chrome Brick (RMK) products endure such vigorous damages.
  2. Working lining: due to periodic rotating operations copper slag, matte, SO2 gas proliferations etc. chemical erosions, penetrations, temperature changes etc. damages, all these erosions and damages are only less rigorous to the working linings, therefore medium grade Chrome DMK, RMK and KPA products are recommended.

OSYMEN Brand

RMK | DMK

RMK | DMK

DMK

Application

Permanent Lining

Working Lining

Tuyere Slag Line Zone

Color

 

 

 

Products

Last updated: 2024-01-03
TOPTOP
print
CopyRight © www.osymen.com All Rights Reserved.